Owen PalmerBy Owen Palmer

Updated November 2026

A Logitech tablet keyboard for iPad not working usually comes down to one of three things: a low or dead battery, a broken Bluetooth pairing, or a mismatched input setting on the iPad. Work through the steps below in order and you should have typing restored within a few minutes. Most cases do not require a replacement.

Step 1: Confirm the Keyboard Has Power

Start with the basics. Many Logitech tablet keyboards, including folio-style and keyboard case models, have a small power switch or a status light. Slide the switch to the on position and watch for an indicator light. If the light does not come on, charge the keyboard for at least 30 minutes using the USB-C or micro-USB cable Logitech supplies for your model, then try again. Check the cable and wall adapter too, since a frayed cable can deliver too little current to wake the keyboard.

Step 2: Reset the Bluetooth Connection on the iPad

If the keyboard has power but nothing types, the pairing is probably stale. Remove the old pairing and start over.

  1. On the iPad, open Settings, then Bluetooth.
  2. Tap the information icon next to the Logitech keyboard and choose Forget This Device.
  3. Put the keyboard into pairing mode. Most Logitech models use a dedicated Bluetooth button that blinks when ready.
  4. Return to the iPad, select the keyboard under Other Devices, and enter the code if prompted.

Step 3: Fix Pairing and Connection Problems

When the keyboard will not stay connected, the cause is often interference or a second device grabbing the link. Keep the keyboard within about 10 meters of the iPad, away from microwaves and Wi-Fi routers if possible. Turn off other Bluetooth keyboards or accessories nearby. Restarting the iPad clears a stuck Bluetooth stack, so hold the top button and a volume button until the power slider appears, then power down and back on.

Step 4: Check Keyboard Settings and Software

Some typing issues are software issues. Go to Settings, then General, then Keyboard, and confirm that Hardware Keyboard is enabled if that option appears. Make sure the correct language layout is selected, since a wrong layout can make keys produce unexpected characters. If the keyboard has a Logitech companion app or firmware updater, install any available update, as updates frequently fix connection drops.

Symptom Most likely cause Fix
No light, no response Dead battery Charge for 30+ minutes
Light on, nothing types Stale pairing Forget device and re-pair
Connects, then drops Interference or low battery Move devices apart, recharge
Wrong characters Layout mismatch Check keyboard language settings

Common Mistakes

  • Forgetting to switch the keyboard on. The power switch is easy to overlook on folio cases.
  • Pairing on the iPad but never confirming the code, which leaves the connection half-finished.
  • Assuming a faulty keyboard when the iPad itself needs a restart.
  • Charging with an underpowered adapter, which can look like a failed keyboard.

A spare charging cable makes battery testing much easier, since a bad cable is a common hidden cause. View on Amazon

A small soft cleaning brush helps clear debris from the keyboard hinge and connector area, which can interfere with contact. View on Amazon

If your tablet itself has charging or port trouble, check iPad Tablet Not Charging: Cable vs Port Fix – Which Should You Check First? before you assume the keyboard is at fault. For a broader overview of matching accessories to your device, see Best Tablet Keyboards.

FAQ

Why does my Logitech keyboard connect but not type?

This usually means the pairing is corrupted or the iPad is using a different input setting. Forget the device, restart the iPad, and pair again to clear it up.

How long should I charge the keyboard before testing it?

Charge for at least 30 minutes before deciding it has failed. Many keyboards need a longer full charge to hold a stable Bluetooth link.

Can a keyboard problem be caused by the tablet?

Yes. A Bluetooth glitch or a need for restart on the iPad can stop a working keyboard from responding, so always test the iPad after resetting it.

Conclusion

In most cases, a logitech tablet keyboard for ipad not working problem is solved by charging, forgetting and re-pairing the device, and clearing interference. Work through the steps in order and note which one restores typing. If none of them help after a full charge and a clean re-pairing, contact Logitech support for a warranty check.

Ready to choose one?

Owen Palmer

About Owen Palmer

Owen Palmer is part of our editorial team and reviews and edits our consumer tech how-to & troubleshooting guides, checking product details against manufacturer specifications and owner feedback.