Updated November 2026
To charge a power bank charger, you connect its input port to a wall adapter or USB power source using a cable that supports the charger’s rated input. Most people get the best results by matching the wattage, using a cable that carries power rather than data alone, and charging from a source that delivers enough current. This guide walks through how to charge a power bank charger correctly, step by step, and what to check when it charges slowly or not at all.
Step 1: Find the Input Port and Its Rating
Start by locating the port labeled “INPUT,” “IN,” or with a downward arrow. Many power banks use USB-C for input, though some older models still use Micro-USB or Lightning. Check the label or printed specs on the body for the input rating, usually written as something like 5V/3A or 20V/3A. That rating tells you the maximum power the charger accepts, and it sets the ceiling for how fast it can recharge.
Shopping for one? See our guide: Dell Laptop Battery Charger Review: Is the JUOVI 65W Power Bank Worth It?.
Step 2: Choose the Right Cable and Power Source
The cable and adapter matter as much as the charger itself. A cable that carries only charging current without full data wires is often fine for input, but a weak or damaged cable can throttle speed or overheat. Use a cable rated for the wattage you need, and pair it with a wall adapter that matches or exceeds the input rating. A laptop USB port usually delivers far less power than a dedicated wall adapter, so expect slower charging from a computer.
Step 3: Connect and Monitor the Charge
- Plug the wall adapter into a working outlet and confirm the adapter is rated for USB Power Delivery if your charger supports it.
- Connect the cable to the power bank’s INPUT port, not the OUTPUT port used for charging phones.
- Watch the indicator lights. Most units show charge level with LEDs and may blink or pulse while charging.
- Check the power bank after the first 30 minutes. It should feel warm but not hot to the touch.
- Unplug once all indicator lights are solid or the display reads full.
Step 4: Understand Charging Time and Speed
Charge time depends on capacity and input wattage. A rough estimate is capacity in watt-hours divided by the input power you actually receive, plus some loss from conversion. A 20000mAh unit at 3.7V is roughly 74Wh, so at 18W input you can expect something close to five hours, longer if the input drops. Manufacturers often list full-charge times based on a specific adapter, so check the spec sheet for the rated figure.
Factors That Change Charging Speed
| Factor | Effect on Charging |
|---|---|
| Adapter wattage | Higher wattage speeds up charging, up to the charger’s input limit |
| Cable quality | Thin or damaged cables can limit current and slow the process |
| Port type | USB-C with Power Delivery typically charges faster than basic USB-A |
| Temperature | Charging slows in very hot or very cold conditions |
| Battery age | Older cells may hold less charge and fill more slowly |
Common Mistakes to Avoid
- Plugging into the OUTPUT port, which discharges the bank rather than charging it.
- Using a phone charger rated far below the input spec, which causes very slow charging.
- Charging on a pillow or bed, where heat can build up.
- Leaving the bank plugged in for days after it reaches full charge.
- Using a damaged cable or a cable with bent pins.
Recommended Gear
- USB-C Power Delivery wall adapter: A matching adapter helps deliver the input wattage the bank expects. View on Amazon
- Certified USB-C to USB-C cable: A properly rated cable reduces the risk of slow or unstable charging. View on Amazon
- Digital USB power meter: A meter shows real input voltage and current so you can confirm what the bank is receiving. View on Amazon
FAQ
Can I charge a power bank while using it to charge my phone?
Many modern banks support pass-through charging, but it generates extra heat and can slow both tasks. Charging the bank separately is usually the better choice when you have time.
Why is my power bank charging so slowly?
The most common causes are an underpowered adapter, a weak cable, or a laptop USB port used as the source. Try a higher-wattage USB-C Power Delivery adapter and a rated cable before assuming the battery has failed.
Is it safe to leave a power bank charging overnight?
Most units stop drawing significant current once full, but it’s still good practice to unplug them after they reach full charge. If the bank gets hot, smells unusual, or swells, stop using it and consult the manufacturer’s support or a qualified technician.
Conclusion
To charge a power bank charger correctly, use the INPUT port, match the adapter and cable to the rated wattage, and monitor heat and indicator lights. Following these steps keeps charging efficient and protects the battery over time. If problems persist, check your cable and adapter first, since they cause most slow-charging complaints.

